THE EASY WAY TO INSTALL VINYL DECALS Video will open in a new window Using the mobile app? Copy this link into your browser: DESCRIPTION Sport 4.0L Replacement Fender Vinyl Decals Sticker TJ 1 Set NOTE: There is no background in the decal, the background is whatever surface you place decal on! In the picture the vinyl decal is the white (paper background) would be whatever surface you apply it to! Decal is only one (1) color!!!! Every decal sticker is removable and leaves no residue. The lifetime of the vinyl is 6+ years. All our decals are machine cut from single colored pieces of Oracal 651 Series vinyl. They are not printed on transparent vinyl and have no transparent border. Every decal order comes with a set of application instructions or check out HOW TO APPLY tab on any product page. White is the recommended color for car decals. Installation Notes: Dry Method installation: Tools needed: decal, squeegee or credit card, soap and water, alcohol, paper towel and tape measure or masking tape if needed for ease in alignment. 1. Clean area you wish to apply your decal with soap and water, dry area and alcohol preferred decal location for a clean application area. 2. Once dry, simply peal the application tape from the decal backing on an angle slowly. Note: if any part of the decal does not transfer to the application tape simply lay tape back down and place on a hard surface and burnish(rub) the decal with your squeegee or credit card and retry. 3. Once decal is removed from backing carefully place your decal in the desired location. Note: pre plan ahead on angle and exact placement of decal as there are no adjustments using this method. Once it sticks that will be the location of the decal. 4. After placing decal on you desired surface, burnish the transfer tape with your squeegee or credit card to apply and remove any air bubbles. 5. Peel transfer tape back at an angle slowly to expose your new decal. If any part of the decal lifts up in this process, simply lay transfer paper back down and burnish again. Continue to remove until transfer paper is completely removed and your decal is attached to your application surface. 6. Your are now finished and able to enjoy your new decal, wait about 2 days before washing your vehicle. If placed on an indoor surface like a glass bowl, hand wash only as needed. Wet Method installation: Tools needed: decal, squeegee or credit card, soap and water, spray bottle, alcohol, paper towel and tape measure or masking tape if needed for ease in alignment. 1. Clean area you wish to apply your decal with soap and water, dry area and alcohol preferred decal location for a clean application area. 2. Take spray bottle and fill with water and a couple drops of dish soap. Spray application site liberally and simply peal the application tape from the decal backing on an angle slowly. Note: if any part of the decal does not transfer to the application tape simply lay tape back down and place on a hard surface and burnish(rub) the decal with your squeegee or credit card and retry. 3. Once decal is removed from backing spray your soap and water solution liberally on the sticky part of the decal. Decal can now be placed and be moved around until the desired location is reached. 4. After placing decal, burnish the transfer tape with your squeegee or credit card to apply and remove all water and any air bubbles from under the decal. 5. Peel transfer tape back at an angle slowly to expose your new decal. If any part of the decal lifts up in this process, simply lay transfer paper back down and burnish again. Continue to remove until transfer paper is completely removed and you decal is attached to your application surface. 6. Your are now finished and able to enjoy your new decal, wait about 2 days before washing your vehicle. If placed on an indoor surface like a glass bowl, hand wash only as needed.